Micro-macro thread for fast osseointegration

With the highly innovative Microcone range of prosthetics you are able to manage all possible prosthetic indications. The high precision, conical implant abutment connection can be securely fixed in place and prevents micromovement between the implant and the abutment. 

There is a wide range of abutments for challenging cases. Wheter crown, bridge or removable prosthetic parts, you will have the full scope of the Microcone prosthetic indications. 

Microcone – micro-macro thread for fast osseointegration


Micro-macro-thread

The unique, highly complex, self-tapping micro-macro thread of the implant promotes the optimum permanent apposition of bone cells and their retention not just in the crestal region, but across the entire implant surface. The continuous presence of the micro-thread on the macro-thread sides and in the root of the thread provides for the largest possible contact surface with the bone. With subcrestal insertion, this results in an interplay with the conical tight joint, an accumulation of the bone over the shoulder to the interface. Together with the biologically optimal dimensioned coronal micro-thread the conical joint ensures that it also permanently stays put there. This for its part results in support of the soft tissue above it and thus permanent red and white aesthetics. The thread design that is to be inserted atraumatically reduces the risk of medium to long-term decubital necrosis to a minimum.


Emergence profile

The natural forming of the prosthetic emergence profile is an additional building block to ensure aesthetically predictable results and achieves ideal long-term treatment successes in conjunction with all the other outstanding properties of the implant. It preserves the gingiva and takes account of the biological principles in the case of all indications. And not least it ensures ideal prosthetic handling.


Surface

The highly pure, sand-blasted and acid-etched surface extends the entire length of the implant to the implant shoulder. It has ideally dimensioned micro-macro roughness to allow the apposition of bone-forming cells, thus promoting optimum and particularly reliable long-term osseointegration of the implant. In combination with the coronal micro-thread and conical interface it ensures exceptional crestal bone formation, past the implant shoulder to the interface. 

  • Implant diameters from 3 mm to 5 mm 
  • Implant lengths from 6.5 mm to 15 mm 

5 implant diameters and 6 implants lengths ensure optimum dimensions of the implants for every indication. The implant diameter 3 mm (two part) enables insertion in narrow tooth gaps of the upper side and lower side and middle incisors.

Resources