See for yourself and take a critical look at what characterizes a MEDENTiKA® Original
What does precision in detail mean?
Quality is demonstrated most clearly in a direct comparison – and we love transparency. For this reason we have prepared section cuts of our abutments and also those of the original manufacturer. The illustration reveals every single design and manufacturing feature. With these photographs we want to show you that we do not simply copy, but refine, whenever possible and appropriate.
The images reveal every single design and manufacturing detail of our craftmanship. On the left with the fitted MEDENTiKA® abutment and on the right with the abutment of the respective original manufacturer.
compatible with Nobel Biocare / NobelReplace® Tapered
|Reduced gap dimensions (see horizontal section below) on the preliminary cylindrical segments ensure reduced relative movements between the implant and abutment. This reduces the stress on the abutment screw and "micro-pump effect" of the system.
|Reduced gap dimensions on the preliminary cylindrical segments ensure less relative movement between the implant and abutment. This reduces the stress on the abutment screw and "micro-pump effect" of the system.
compatible with DENTSPLY SIRONA / ASTRA TECH OsseoSpeed® EV
|Very precise conical fit with deep transmission in the conical section.
compatible with Nobel Biocare® / NobelActive® / NobelReplace® Conical
|A precisely manufactured conical section ensures full contact on the implant cone. A hex in the implant with the smallest possible gap dimensions ensures minimum rotation and axial stabilisation. A solid screw shank finally stabilizes the abutment with horizontal force application.
compatible with Zimmer Dental® Tapered Screw-Vent®
|Reduced gap dimensions in the hex for decreased rotation and increased axial stabilisation.
|Shorter, more solid abutment screw for stabilisation of the abutment by horizontal force application.
compatible with DENTSPLY SIRONA / XiVE® S
|The gap in the first cylindrical segment is significantly reduced. This reduces the relative movement of the abutment to the implant and the force this exerts on the abutment screw.
|The gap in the second segment is also reduced and ensures much deeper transmission. Deepest possible transmission of the forces ensures higher axial stabilisation of the abutment in the implant.
* All Medentika® abutments are displayed with the original implant from the manufacturer.
** All original implants are shown with original abutments from the respective manufacturer.