MEDENTiKA® titanium bases are suitable for a very wide range of indications and are available for all conventional implant systems. MEDENTiKA® titanium bases are always original – regardless of whether they are used as rotating titanium bases for multi-unit restorations or indexed titanium bases with short or long chimneys for single-tooth restorations.

The rotating titanium bases are available in the chimney height of 3.5 mm. They are suitable for fabricating multi-unit bridges and bars, either digitally using the original MEDENTiKA® library or for waxing up the superstructure conventionally.

The scanbodies are suitable for both intraoral and conventional use in a scanner. All scanbodies are manufactured from titanium, ensuring considerably higher precision and durability. The scanbodies with a special surface treatment can be sterilised and are labeled for better differentiation. Scanbodies are required for use both as titanium bases and also for the design of customised MedentiCAD abutments.

High precision PreFace abutments as milling blanks. To create MEDENTiKA® abutments digitally you need firstly construction software from 3Shape, Exocad, Dental Wings or Delcam and secondly the original MEDENTiKA abutment library for PreFace abutments.

Highly precise repositionable laboratory implants with absolute radial and axial stability, specially developed for printed models and intraoral scanner. The final position is evident when there is a clearly audible >>CLICK<<. This prevents the position being changed unintentionally due to vibration or contamination, for example. This considerably increases the process reliability and avoids what are usually very costly errors. The product range is supplemented by the matching placement tools for the customized laboratory implants.

The MedentiBASE abutment allows you to fabricate a wide range of multi-unit, conventional or CADCAM bar and bridge restorations in the upper and lower jaws. You can choose between direct screw-retained bar and bridge restorations or screw-retained bar and bridge restorations with the aid of the MedentiBASE adhesive base for passive-fit. MedentiBASE abutments are available in 5 different gingival heights.

The MedentiBASE titanium base is available in the chimney height of 3.5 mm. It is suitable for adhesive retention of multi-unit bridges and bars, in particular fabricated using ceramic and resin materials. The original MEDENTiKA® library is available for the digital construction.

The MedentiBASE scanbody can be used for scanning and digitalising the model situation. The MedentiBASE library, which is required for the design of the framework, can of course be obtained from MEDENTiKA® free of charge. This is currently available for 3Shape, Dental Wings and Exocad.

You manually model your abutment using the MedentiCAD wax-up base, and we produce it for you.